Hawk
SKU: Hawk
View Product on Marketing Website
Eastman’s Hawk offers high-speed, precision cutting, impressing with its functional design and concentration on the basic essentials:
- Freely accessible work surface from all sides
- Extremely robust traverse bridge with minimal protruding at the sides and rack and pinion drive system in all axis for slip-free drive.
- Powerful AC-servo motors and modern CAN-Bus-steering technique enable high throughput
Categories
Automated Cutting, Automated Cutting Systems
Product Attributes
| System Sizes |
Contact the factory for additional information. |
|---|---|
| Material clearance thickness |
max. 1.8 inches depending on the tool head and protective underlay |
| Static repeatability |
± 0.02 mm/m @ 20deg C (0.008 inch @ 68deg F) |
| Electric - control power / PC |
200-210V, 3ph, 50/60Hz, 2.6kVA |
| Max. cutting speed |
45 in/sec (Depending on the cutter size, cutter configuration and tool head) |
| Max. acceleration |
1.15G (Depending on the cutter size, cutter configuration and tool head) |
| Electric - Vacuum Blower |
208/230/380/460/575V, 50/60 Hz, 8.5 HP, VFD control |
| Operating temperature |
+10 deg C up to +30degC (50F up to 86F) |
| Relative humidity |
40 – 80% non-condensing |
| Maximum Acceleration |
1.0 g |
Disclaimer: Achievable speeds and accelerations are tool-, material- and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.